. . west.seattle.ryan . .


Picture
May 16, 2012, 6:42 pm
Filed under: ..Random west seattle.., ..Wizard.., Barcellona, Monza

Moped license plate for the Monza, from Barcelona, Spain

This will be permanently attached



New Beginnings
May 8, 2012, 9:10 pm
Filed under: ..Moped related nonsense..

 

One of 3 Puch Monza 4 speed manual engines that are being given the once over.

The Short version of the story is :

I had a monza motor put on a kromag frame ( see posts ) and when I went to rebuild it, I had done everything right except put one shim .5mm in a wrong spot.  Thus the clutch would not disengage, rendering the motor useless.

The Wizard has shown me my error and now the Barcellona is getting the 50cc Metra kit, the Kromag is getting the 80cc Metra kit, and the spare is getting the stock ported cylinder that was doing 55+ with a 20mm PHBG and a modified 6p.

Anyway, things are working slowly again, final project for the tattoo apprenticeship is finished and awaiting critiques.  Possibly ordering machines in the near future.

I love my life

 



. . Long time . .

WS/Wizard made

The only reason I post this, is that this material is actual clutch material from a go-kart manufacture that is designed for wet applications with engagements of up to 18K

When I first talked with them and asked them if 5-6500rpm launches would tear the clutch material apart, they kind of chuckled.

Testing to begin soon

I have 8 sets of springs, new hardware, Aluminum centers with steel taper press fit



. . Working for memorial weekend / Clutch destruction and construction . .
May 31, 2011, 6:36 pm
Filed under: ..W/WS Clutch..

Well, first things first, the black magic of the wizard/westseattle is not going to be ready for Reno.

Instead of pushing it, and spending late nights cutting into frames, making suspension and figuring out everything else on the bike, it was a mutual decision to continue to work at the pace that we have been.  ( well the pace that mike has been so gracious to work on it, in between his paying job and his own projects )

So, I am fully rebuilding the maxi/polinardoni/wizard clutch and continuing to make one for a very nice man in New York ( hi ! )

Monday ( memorial day ) I went to the wizard lair and decided to make all the brackets and what not for the trail tech.  I have had this thing sitting around forever and it was time to put it on.

Enjoy some pictures

Now, these are the speedo sensors that come with the Trail Tech VAPOR from Treats.  These sensors require you to modify the bracket that comes with the kit to work on any moped, and the length of the wiring is extremely long.

This is what I chose to use in the above pictures on the maxi.

I, however have ordered this one and it is the proper length, has sticky tape on the back side of it and installs in seconds vs making brackets and such.  If you order this one ( or request it to come in the kits from benji ) you will need a magnet to either replace one of the caliper bolts for you disc brake dudes or jb weld a magnet in line with the sensor on the wheel.

I have this on the Black magic build, and have done this so I can just undo the computer from one bike and place it on the other when I want to ride it.   Instead of purchasing two units.

This is the bracket.  There are handy measurements in the instructions to follow, and if you do, you can make something that looks nice with a tiny 4″x3″ piece of aluminum.

Now just to wire it up and connect the power to the powerdynamo so that the back light is on when it is running and I am set!

On to the clutches!

First thing about the clutch that I have been running ( BRN in the minarelli bell ) is that we have been trying to break it real good and improve on the design.  So far I have broken it at least 4 times, and this last time being the last time this brass center will ever see my motor.  This time I sheared the bolts flush with the outer of the center, and inside a helicoil, also with the springs that I am R&D it decided to melt all of the adhesive on the pads and when I went to pull the clutch they just fell off.    Thats not that big of a deal, since I have more adhesive and can make the repairs, buuuuuut I can not use these brass centers again.  Now we make our own!

I dont have the pictures uploaded yet, but will insert when they are.

As with any mass produced aftermarket part, there are bound to be some mistakes made, cost cutting measures, shit being mass produced in Argentina, etc….

BRN is no exception to this rule.  They cast these brass centered clutches for the Minarelli and Garelli motors, and here is what you might see when and if you purchase one.

AWFUL!

(We are replacing this center for seth k)

So now we make!

We start with a blank of aluminum and hand cut on a mill, then I hand em off to the wizard to set em up in the lathe to cut the taper/drill the holes and make sure its all nice and spaced out pretty.

There are other things that we are doing to these that are secrets, because some people think they can just make products for the moped market without testing them or just throwing them out there without quality control.

( see above BRN im looking at you, jerks )

Oh well /Rant

This is what I am making for myself as well, since the destruction of the other one, and the need to rebuild my maxi in time for the Reno rally ( dont worry, it will be done, no questions )

I leave you with this picture of the wizard lair and his magic powers.  Allowing him to have a magnum on the ground that he is working on, while levitating my maxi in the background so I can work on it without getting dirty on the floor.

What  a nice Wizard!



. . V1.3 slipping for days . .
May 23, 2011, 5:21 pm
Filed under: ..W/WS Clutch..

V1.3 W/WS clutch

Springs are a little extreme, still trying to break them.  I have put 200 miles on this thing in the last 4 days, and have not had any issues other than things rattling off. ( exhaust which is double nutted, and the mount which is double nutted both backed off and started to leak…. )

The bike launches better with jeremy, or josh on there since I have 40lbs on them and all my tools 😦

I think I need to go down one size in spring, and make it not slip this much.  Today we tune!



. . Quit breaking shit . .
May 10, 2011, 8:12 am
Filed under: ..W/WS Clutch..

Chain = broken

Slapped Josh in the ass good too…

WS/Wizard clutch V1.2

Gnar



. . NHK Damper . .
May 7, 2011, 6:47 pm
Filed under: ..NHK..

NHK 7 way adjustable steering damper

Aftermarket for RD350/400 and XS650

( whatever you can put it on, these are big bikes to be stealing parts from for a moped….. 😛  )

Going on the new project….  Black Magic Wizard Project

If you dont know or understand what this does…

 : STOLEN FROM WIKIPEDIA :

Steering damper

From Wikipedia, the free encyclopedia

Transverse linear steering damper (centre foreground)

steering dampersteering stabiliser or sprint damper is a damping device designed to inhibit an undesirable, uncontrolled movement or oscillation of a vehicle steering mechanism, a phenomenon known in motorcycling as wobble, or in extreme cases, a tank-slapper. Modern motorbikes are unlikely to exhibit this behaviour in daily use thanks in part to better dampers and due to their very stiff front ends and other general improvements in design and tyre technology.

Device usage

Electronic steering damper with control arm attached to the upper triple clamp.

Sport bikes have a short wheelbase and an aggressive steering geometry to provide the ability to make very quick changes in direction. This has the harmful side-effect of making the bike less stable, more prone to feedback from uneven road surfaces, and more difficult to control.[1] In addition, their light weight and powerful engine can cause frequent wheelies. If the front wheel significantly deviates from the direction of travel when it touches down, it may cause an unwanted wobble. Steering dampers are factory installed on some high-end sport motorcycles and fitted to most contemporary racing bikes to counter these behaviours. Steering dampers are also mounted to off-road motorcycles such as motocross bikes.[2] A damper helps keep the bike tracking straight over difficult terrain such as ruts, rocks, and sand, and also smooths out jolts through the handlebars at the end of jumps. They also reduce arm fatigue by reducing the effort to control the handlebars.

An aftermakret steering damper attached below the lower triple clamp.

On motorcycles, one end of the damper is mounted to the steering yoke or triple tree, the other to the frame. Two main types are linear and rotary. Linear dampers resemble a telescoping shock absorber and operate in a similar manner. They can be aligned either longitudinally and to one side of the steering, or transversely across the bike. Rotary dampers resemble small boxes and operate via a rotating pivot. They are mounted coaxially with the steering axis and are typically located on top of thesteering head. An electronically variable damper uses a rotary damper with hydraulic fluid that flows freely at low speeds, allowing easy turning, while restricting flow at higher speeds when more damping is necessary, as determined by the engine control unit.[1]

For motorcycles with sidecars, especially for motorcycles which have been retrofitted with a sidecar and where the front wheel geometry, or trail, has not been adjusted for use with a sidecar, a steering damper is beneficial. This prevents low speed wobble which may occur in the lower speed range of about 13 to 20 mph. In older motorcycles adjustable friction dampers had been routinely installed. Hydraulically operated steering dampers may be retrofitted. The installation and operation of a steering damper must be inspected by an expert or examiner and must be entered in the vehicle papers.[3]