. . west.seattle.ryan . .


. . Believe the hype, aka 15 bing / polini . .
October 24, 2010, 8:50 pm
Filed under: ..Another Polini..

I love MOTOMATIC MOPEDS and what they do to push moped building to the next level. Seriously check them out and that new polini intake, BOSS!

Anyway, I saw the ” dont believe the 15 bing hype “ and just had to post this here.

West Seattle Steve aka the Go Go Gorilla :

NON PORTED or MODIFIED in any way Polini 64cc

E50

Case matched

POINTS

Stock reeds

Simonnini

16×45 Gearing

High High compression aka 215psi+ on 92 pump gas ( dont let anyone tell you it can not be done, and this is a daily reliable rider )

B7HS with 2 crush washers

Stock 2 shoe, no lightening of anything

15mm BING !!!!!! ( buddy mod slide included at no additional charge )

# 2.17 Atomizer

# 86 main

Exact replica of my first Polini from 2005/6, extra ripper back then

Track 3 (End)
Last Updated by West on Feb 7

Created by My Tracks on Android.

Total Distance: 6.96 km (4.3 mi)
Total Time: 24:25
Moving Time: 10:56
Average Speed: 17.40 km/h (10.8 mi/h)
Average Moving Speed: 38.22 km/h (23.7 mi/h)

Max Speed: 99.90 km/h (62.1 mi/h)

Min Elevation: 4 m (14 ft)
Max Elevation: 86 m (283 ft)
Elevation Gain: 219 m (720 ft)
Max Grade: 9 %
Min Grade: -21 %
Recorded: Mon Jan 25 21:33:49 PDT 2010
Activity type: –

LINK

* disclaimer

I know that this new MOTOMATIC intake and carb combo will just destroy the 15 bing all around and is worth every penny. ( You should buy one )

I like the comradery between moped builders/tuners and decided to write my rebuttal on the subject.

I heart you rafter/nate/motomatic team

Working on V6.66 tomorrow



Polini maxi
August 26, 2009, 10:31 pm
Filed under: ..Another Polini.. | Tags: , , , ,

Introducing the short lived polini maxi.

Short lived, because my Ritto crank decided to let loose the needle bearings on the big end of the rod 20 miles into the break in :/

Granted the crank was 4 years old, it took this out *sad face*

100_0751
100_0749
100_0753
100_0752

Super big case match
20mm PHBG
4 petal malossi reed valve
16 to 1 compression
Stock Polini
No gaskets
HPI 12v
Simoninnnnnni
17 x 45 Gearing

😦